|
Post by docdennis on Feb 18, 2009 14:33:27 GMT -5
It's time to buy the brembo master cylinder.
|
|
|
Post by markzx6r1904 on Feb 18, 2009 14:50:00 GMT -5
im broke haha It's time to buy the brembo master cylinder.
|
|
|
Post by almighty1 on Feb 18, 2009 21:57:51 GMT -5
the discoloration is from the heat and friction. ok lang yan. master talaga sira.
|
|
|
Post by markzx6r1904 on Feb 19, 2009 16:38:41 GMT -5
i just ordered my internals for the master cylinder and i should get the part by next week just in case pero hiramin ko pa rin yung brake system ng kaibgan ko jas in case
|
|
|
Post by MaYo (((d[0_o]b))) on Feb 19, 2009 22:05:02 GMT -5
Why didnt you just get a whole new Kawi or Brembo Master Cylinder Mark?
|
|
|
Post by markzx6r1904 on Feb 19, 2009 22:17:30 GMT -5
the whole new master for KAWI is $200 and im guesin the Brembo master is about $280 and the rebuild kit or the internals & seals i need for the master cylinder only cost me $45. that is all i need to make it work properly again. if i get a whole new OEM master cylinder kit they will basically send me things i got or things that i dont need. so yeh $45 compare to $200 is a good move for me.. ;D ;D ;D ;D
|
|
|
Post by MaYo (((d[0_o]b))) on Feb 19, 2009 22:32:18 GMT -5
Aaah...good deal. I'll be at Al's til about 1:30 pm before I have to go meet with Tif in irvine and I wont be back til Sunday evening so I hope I can be of help on Saturday to those who need it.
See you all at Al's place. Seriously, who's got the beer!? Hahahahahhaa Im bringing bottles of water for everyone so we dont get dehydrated.
|
|
|
Post by Jon "bustanut" on Feb 20, 2009 2:00:07 GMT -5
Aaah...good deal. I'll be at Al's til about 1:30 pm before I have to go meet with Tif in irvine and I wont be back til Sunday evening so I hope I can be of help on Saturday to those who need it. See you all at Al's place. Seriously, who's got the beer!? Hahahahahhaa Im bringing bottles of water for everyone so we dont get dehydrated. don't worry bout the beer just be there,, ;)and your DD
|
|
|
Post by markzx6r1904 on Mar 3, 2009 16:06:57 GMT -5
after changing the internals for the MC and changing the pads.....the brakes still locked on me.....so its gotta be the seals huh? what you guys think?
|
|
|
Post by docdennis on Mar 3, 2009 17:34:43 GMT -5
It's time for a new bike......
|
|
|
Post by MaYo (((d[0_o]b))) on Mar 3, 2009 18:05:15 GMT -5
You really need a New Master Cylinder Mark, dont go cheap on braking system especially your front brakes; this could mean a world of difference between your own personal safety or a very disastrous outcome. Go and get a ---------> BREMBO <--------- Master Cylinder.
Mr. Visa or Ms. Mastercard can help you. ;D
|
|
|
Post by Jon "bustanut" on Mar 3, 2009 18:59:47 GMT -5
You really need a New Master Cylinder Mark, dont go cheap on braking system especially your front brakes; this could mean a world of difference between your own personal safety or a very disastrous outcome. Go and get a ---------> BREMBO <--------- Master Cylinder. Mr. Visa or Ms. Mastercard can help you. ;D +1 or like doc said new bike ;D
|
|
|
Post by markzx6r1904 on Mar 3, 2009 19:11:17 GMT -5
i will install new pistons seals and dust seals....IF it doesnt work..i will buy 19x20 Brembo MC and superbike brake lines.
|
|
|
Post by MaYo (((d[0_o]b))) on Mar 3, 2009 21:30:16 GMT -5
Brembo 19x18 Master Cylinder Should Suffice even with heavy duty use of high speeds and late braking into a corner and/or trail-braking into a corner.
With a 19x20, you'll probably need New Calipers to go with such a huge Master Cylinder.
|
|
|
Post by markzx6r1904 on Mar 3, 2009 23:10:49 GMT -5
oooh ok i didnt which one haha cool thanks for lettin me know i was so close gettin em online....so 19x18 should be cool thanks mayo
|
|